IEC60320-1 Appliance Couplers Testing Equipment Power Cord Bending Test Apparatus with 16A Output Current

1. Introduction

Power cord bending test apparatus designs to meet the test requirements of IEC60320-1 clause 22.3, for applying bending test to cord of connectors and plug connectors. The test apparatus is configure with 7 inch LCD touch screen, PLC and step motor. The flexing angle, flexing speed an test times can be adjusted. Equip with 4KW transformer can realize the bend test for different power cord with different rated current. The clamp can adjust the swing center to meet a variety of standard requirements.

2. Bending Test Procedure

Test samples with flat cords are mounted so that the major axis of the section is parallel to the axis of oscillation. The cord is loaded with 20N / 10N mass, so that the force applied. A current equal to the rated current of the connectors / plug connector is passed through the conductors, the voltage between them being equal to the rated voltage. The oscillating member is moved backwards are forwards through an angle of 90° (45° on either side of the vertical). The number of flexing being 10,000 and the rate of flexing being 60 per minute.

During the test, there shall be no interruption of the test current, and no short-circuit between conductors. After the test, the test sample shall show no damage.

3. Specification

4. Figures

5. Attention of Using

1) Please pay attention to the safety of power supply. Be sure to use a well-grounded power supply. It is forbidden to unplug the grounding pin to use this device.

2) Please pay attention to moisture-proof and waterproof, so as not to affect the service life of the product.

3) The testing machine has movable casters. It is forbidden to push the box quickly, so as not to injure others, and may even cause the equipment to overturn.

4) It is strictly forbidden to use this testing machine beyond the above standards. The use of this device beyond the standard required by this device is not within the scope of warranty, nor is it within the scope of legal quality assurance. Unforeseen problems are not within the scope of our company's responsibility. Please do not abuse or misuse this device. If you have any questions, please contact our after-sales personnel in time.

5) It is forbidden to modify, or disassemble the test equipment, otherwise, any electric shock or fire will have nothing to do with our company.

6) During the use of this equipment, there is no joint liability, and non-professionals are prohibited from operating this equipment. If you are unclear, please contact our company's after-sales service as soon as possible.

6. Why Pego?

1). PEGO is professional on electrical lab testing equipment, our goal is to provide our customers with better price, better quality and better service.

2). Customized Service: We can help our customers to design and develop new equipment according to their requirement. We are flexible and capable Supplier.

3).Excellent Quality: 12 months warranty, 100% guarantee test before delivery. And all our products can pass the third-lab calibration which is authorized by ISO17025.

4). After Sales Service and Technical Assistance: 24 hours technical support by email. Our professional team is always here willing to be your technical consultant.

5). Quick Delivery: Our company provides just-in-time delivery, and our freight forwarder can provide transportation services at the most reasonable price to solve your worries.

6). Prompt Response to Customers: we promise to reply our customers within 24 hours

Pego Electronics is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. Our business scope includes IP testing equipment, dust chamber, pendulum and vertical impact testing equipment, flame test apparatus,  glow wire test apparatus, needle flame tester, tracking index tester, iec61032 IP code probes, IEC60061-3 gauges for lamp caps and holders, UL498/VDE0620/BS1363-1 gauges for plug and socket, ground resistance tester, insulating resistance tester, hipot tester, temperature chamber, spring hammer,  tumbling barrel test equipment, test vessels, ESD gun, surge generator, goniophotometer, integrating sphere, spectroradiometer, power supply and etc. Besides, we can provide customized service.

Nowadays, we have several production lines in China, we imported advance technology and machines to make the gauges to keep high precision, and use the world famous-brand components to make the equipment more reliable. We promise the customers can get the high quality products during the shortest lead time, and we can provide the third-lab calibration certificates if customer request. The Pego’s products have been sold to the world wide, and widely used in labs, production line, QC and R&D departments with the features of high precision, simple operation, humanization design and good performance.

To Provide better user experience with better quality and better price is the motto of Pego. With the growth of test items, PEGO hope to grow with our users, and search for better test solution for our users.