Apparatus for Checking Damage to Conductors as Per IEC60884-1
clause 12.2.5
1. Introduction
The apparatus for checking damage to conductors is designed to meet
the test requirements of IEC60884-1:2022 clause 12.2.5 and figure
13, IEC60669-1 clause 12.2.5 and figure 9, IEC62052-31 clause
6.9.7.3 (for flexion test). It is applied to checking if the
terminal with screw clamping or screwless clamping can withstand
the mechanical stress in normal use, and judging whether the design
and structure of the screw clamping terminal meet the requirements
of not excessively damaging the conductor when it clamps the
conductor.
2. Specification
| Model | PG-ADG | PG-ADG1 | PG-ADG2 |
| Control mode | Electric control |
| Working station | 1 |
| Working speed | 10±2r/min |
| Bushing rotation diameter | 75mm |
| Test time | 0-99min59s (test time can be preset, and stop automatically when
time up) |
| Configured mass | 0.3KG, 0.4KG, 0.7KG, 0.9KG, 1.4KG, 2.0KG | 0.3KG,0.4KG, 0.7KG, 0.9KG, 1.4KG, 2.0KG | 0.4KG, 0.7KG, 0.9KG, 1.4KG, 2.0KG, 2.9KG, 4.5KG, 6.8KG, 9.5KG |
| Test height | 260mm, 280mm | 260mm, 280mm, 300mm | 260mm, 280mm, 300mm, 320mm, 343mm |
| Diameter of bushing hole | 6.5mm, 9.5mm | 6.5mm, 9.5mm, 13mm | 6.5mm, 9.5mm, 9.4mm, 13.0mm, 14.5mm, 15.9mm |
| Height adjusting mode | Manual adjustable |
| Maximum conductor cross-section it can test | ≤10.0mm2 | ≤25.0mm2 | ≤50.0mm2 |
| Dimension and weight | L530mm*D500mm*H800mm/80kg |
| Working power | AC220±10%, 50/60Hz |
| Working condition | 5-35℃ (temp.), 30%-90%R.H. |
| Standard conform to | IEC60884-1 clause 12.2.5/figure 13
| IEC60669-1 clause 12.2.5/figure 9 | IEC62052-31 clause 6.9.7.3/figure H.1 |
3. Frequently Asked Questions
1). How can I select the the right model?
Pego: Please select the correct model based on the maximum
cross-sectional diameter of the conductor you need to test and the
standard number it should comply with.
2). Can this equipment can with calibration certificate?
Pego: Of course yes. The equipment can pass the calibration from an
ISO17025 authorized lab and get the calibration certificate.
3). Will you provide the on-site installation service?
Pego: Actually, the equipment will no need on-site installation
service. The equipment will be shipped almost as a whole, user just
need to make simple wiring connection when receive the goods.
4). What is the warranty period? and how can we get the after-sales
service?
Pego: The warranty period is 12 months upon user receive the goods.
95% of after-sales problems can be solved by our engineer team
through remote service. Customers will get a response within 24
hours in business day after reporting the problem. In our
experience, most of the troublesome can be removed with the
guidance of our engineer, only a small part of the troublesome are
caused by parts failure, that is because we use the branded
components, which have better performance and good reliability. If
the parts damaged, we will a send a new for replace, the new parts
will be charged for free within the warranty period. And also our
eigneer team will teach how to replace the damaged parts.
