Comprehensive Waterproof Test Chamber for IPX1, IPX2, IPX3, IPX4, IPX5, IPX6 and IPX9K Tests

1. Introduction

The product and material damage caused by water from nature (like rain water, sea water, river water and etc.) are causing incalculable economic losses every year. The damage mainly includes corrosion, fading, deformation, strength decrease, swelling, mold and etc., especially electrical products are easy to cause fires due to short circuits caused by rain. Therefore, the enclosure protection against water test is necessary for some specific product and material.

The IPX1-9 comprehensive waterproof test chamber is designed to simulate the dripping water, spraying water, splashing water and jetting water to test the physical and other relate properties of the auto parts and electronic products under test. It can meet the requirements of IEC60529, GB/T4208, DIN40050-9 and ISO26053. The IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX9 and IPX9K tests can be performed in one equipment.

IPX1 Dripping water
Dripping water (vertically falling drops) shall have no harmful effect. Test duration: 10 minutes, equivalent to 1 mm rainfall per minute.

IPX2 Dripping water when tilted up to 15°
Vertically dripping water shall have no harmful effect when the enclosure is tilted at an angle up to 15° from its normal position. Test duration: 10 minutes, Water equivalent to 3 mm rainfall per minute.

IPX3 Spraying water
Water falling as a spray at any angle up to 60° from the vertical shall have no harmful effect. Test duration: 5 minutes, volume: 0.7 litres per minute, Pressure 80-100 kPa.

IPX4 Splashing of water
Water splashing against the enclosure from any direction shall have no harmful effect. Test duration: 5 minutes, volume: 10 litres per minute, Pressure 80-100 kPa

IPX5 Water jets
Water projected by a nozzle (6.3 mm) against enclosure from any direction shall have no harmful effects. Test duration: at least 15 minutes, volume: 12.5 litres per minute, pressure 30 kPa at distance of 3 m.

IPX6 Powerful water jets
Water projected in powerful jets (12.5 mm nozzle) against the enclosure from any direction shall have no harmful effects. Test duration: at least 3 minutes, volume: 100 litres per minute, pressure 100 kPa at distance of 3 m.

IPX9K High Pressure/Steam Water Jets Cleaning

Water projected in high pressure high temperature against the enclosure from 4 directions (0⁰, 30⁰, 60⁰, 90⁰) shall have no harmful effects. Test duration: 30s per direction, water volume: 14~16 litres per minute, pressure: 8000~10000 Kpa, temperature: 80±5℃, test distance: 100 to 150mm.

2. Features

● For IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX9 and IPX9K tests.

● The enclosure of the equipment is made of SUS304 and coating with stoving varnish.

● The turntable, oscillating tubes, water tank, nozzles and etc. are made by SUS304# stainless steel.

● Built-in water tank, the water can be recycled. With ball valve to control the water level, and has low water level alarm function

● With a transparent observation window made by tempered glass, an LED light is installed in the box to facilitate observation during the test.

● The flowmeter and pressure sensor are customized with higher accuracy.

● It has a compressed air drainage function. After the test is completed, the excess water in the drip board and the nozzles can be drained out to avoid long-term accumulation to block the needle hole. (Note: users need to prepare air compressor)

● IPX1-2: The turntable adopts stepping motor, can rotate forward and reverse. The rotation speed and titled angle can be accurately adjusted by touch screen.

● IPX3-4: The oscillating tube drives by Panasonic Servo Motor, the rotation speed and angle can be accurately adjusted by touch screen. The nozzles are made of SUS304, not easy to break.

● IPX5-6: The jet nozzles are strictly designed according to IEC60529 figure 6.

● IPX9K: IPD temperature control, set the temperature by touch screen.

● Test time: 0-999min adjustment, auto stop.

● With leakage protection, water shortage protection, overflow protection and short circuit protection to protect the equipment from damage . Door induction protection to protect the operator from hurt.

● Filtration measures: equip with high-precision filter can effectively filter impurities in tap water, the filter element can be replaced regularly.

● The working box equip with a waterproof socket (AC220V, 10A) for sample to do live test. The power on-off time

can be controlled: OFF time(0-999min)-ON time (0-999min)-OFF time (0-999min), apply to the samples that need to be switched ON and OFF during the test.

● Adopts 7 inch touch screen and PLC core control component, easy to operation and auto control. Equip with wheels makes the overall equipment can move freely.

3. Parameters

4. Details Pictures

Pego Electronics is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. Our business scope includes IP testing equipment, dust chamber, pendulum and vertical impact testing equipment, flame test apparatus,  glow wire test apparatus, needle flame tester, tracking index tester, iec61032 IP code probes, IEC60061-3 gauges for lamp caps and holders, UL498/VDE0620/BS1363-1 gauges for plug and socket, ground resistance tester, insulating resistance tester, hipot tester, temperature chamber, spring hammer,  tumbling barrel test equipment, test vessels, ESD gun, surge generator, goniophotometer, integrating sphere, spectroradiometer, power supply and etc. Besides, we can provide customized service.

Nowadays, we have several production lines in China, we imported advance technology and machines to make the gauges to keep high precision, and use the world famous-brand components to make the equipment more reliable. We promise the customers can get the high quality products during the shortest lead time, and we can provide the third-lab calibration certificates if customer request. The Pego’s products have been sold to the world wide, and widely used in labs, production line, QC and R&D departments with the features of high precision, simple operation, humanization design and good performance.

To Provide better user experience with better quality and better price is the motto of Pego. With the growth of test items, PEGO hope to grow with our users, and search for better test solution for our users.