ISO17025 Calibrated Test Finger Probe Kits Test IEC61032 Test Probe
B Test Probe 12 Test Probe 13 Test Probe 41
The IEC61032 test probe b, test probe 12, test probe 13 and test
probe 41 are designed according to IEC61032 standard. All the
probes are made of nylon and steel and can be with a third-lab
calibration certificate authorized by ISO17025 lab.
1. Introduction of IEC61032 Test Probe B:
Jointed test finger (test probe B) is consisted dactylogryposis and
handle, the dactylogrypossis has two active joints that can bend in
90 degrees and made by insulating material, the handle can
customized with terminals or M6 threaded hole to work with force
gauge. Jointed test finger is to protection of person’s finger from
hazard parts (Live parts or mechanical parts) of enclosure
according to the standards of IEC61032 figure 2, IEC60529 and
IEC60065.
2. Specification of IEC61032 Test Probe B:
| Model | PG-TPB | PG-TPB-1 | PG-TPB-2 |
| Jointed point size 1 | 30±0.2 | 30±0.2 | 30±0.2 |
| Jointed point size 2 | 60±0.2 | 60±0.2 | 60±0.2 |
| Length of finger | 80±0.2 | 80±0.2 | 100±0.2 |
| Fingertip to baffle size | 180±0.2 | 180±0.2 | - |
| Fingertip taper fillet | S4±0.05 | S4±0.05 | S4±0.05 |
| Diameter of finger | Ф12 0 -0.05 | Ф12 0 -0.05 | Ф12 0 -0.05 |
| Diameter of baffle | Ф75±0.2 | Ф75±0.2 | Ф125±0.2 |
| Thickness of baffle | 5±0.5 | 5±0.5 | - |
| A-A section diameter | Ф50 | Ф50 | - |
| A-A section width | Ф20±0.2 | - | - |
| Thruster | 10N optional | 10N optional | 10N optional |
| Standard | IEC61032 | IEC60335-1 | IEC60335-2-14 |
3. Introduction of IEC61032 Test Probe 12
The IEC61032 Test Probe 12 is designed according to IEC61032 figure
8. This pin is intended to be used on appliances for verifying the
inaccessibility of hazardous live parts or hazardous mechanical
parts which are liable to be touched accidentally by a tool, for
example a screwdriver or similar pointed object in normal use.
4. Specification of IEC61032 Test Probe 12
| Diameter of test pin | 4mm |
| Length of test pin | 25mm |
| Diameter of stope face | 25mm |
| Thickness of stope face | 4mm |
| Material | Insulating material (handle), metal (test probe) |
5. Introduction of IEC61032 Test Probe 13
The IEC61032 Test Probe 13 is designed according to IEC61032 figure
9. The pin is intended to verify the protection against access to
hazardous live parts in class 0 equipment and class II equipment
(see IEC60536)
6. Specification of IEC61032 Test Probe 13
| Diameter of test pin | head 3mm, bottom 4mm |
| Length of test pin | 15mm |
| Diameter of baffle | 25mm |
| Thickness of baffle | 4mm |
| Material | insulating material, metal |
7. Introduction of IEC61032 Test Probe 41
The IEC61032 Test Probe 41 is designed according to IEC61032 figure
16, and meet the requirements of IEC60065. This bar is intended to
verify the protection of fixed and portable visibly glowing radiant
heaters.
8. Specification of IEC61032 Test Probe 41
| Diameter of probe | 30mm |
| Length of probe | 80mm |
| Diameter of handle | 50mm |
| Length of handle | 80mm |
| Material | insulating material (handle), probe (metal) |
About Pego
Pego Tester (Jiangxi) is founded by PEGO GROUP in 2011, a
professional high-tech enterprise engaged in developing, marketing
and service for electronic test equipment. Our business scope
includes IEC60061-3 gauges for lamp caps and
holders,UL498/VDE0620/BS1363-1 gauges for plug and socket, IEC61032
IP code probes, UL probes, flame test apparatus, glow-wire test
apparatus, tracking index apparatus, needle flame test apparatus,
ground resistance tester, insulating resistance tester, hipot
tester, temperature chamber, waterproof test equipment, dust
chamber, spring hammer, pendulum hammer, tumbling barrel test
equipment, test vessels, ESD gun, surge generator, goniophotometer,
integrating sphere, spectroradiometer, power supply and etc.
Besides, we can provide customized service.
Nowadays, we have several production lines in China, we imported
advance technology and machines to make the gauges to keep high
precision, and use the world famous-brand components to make the
equipment more reliable. We promise the customers can get the high
quality products during the shortest lead time, and we can provide
the third-lab calibration certificates if customer request. The
Pego’s products have been sold to the world wide, and widely used
in labs, production line, QC and R&D departments with the
features of high precision, simple operation, humanization design
and good performance.
To Provide better user experience with better quality and better
price is the motto of Pego. With the growth of test items, PEGO
hope to grow with our users, and search for better test solution
for our users.
