IK Level Pendulum Impact Testing Machine Equip with 2J / 5J /10J /
20J Steel Hammers
1. Introduction
The IK mechanical impact test apparatus is designed according to
IEC60068-2-75 Test Ehc and IEC62262 (equivalent EN62262), and can
meet the test requirements of IEC60598, EN50102. The IK Code was
originally defined in European Standard BS EN 50102:1995 and
amended in 1998, following its adoption as an international
standard (IEC 62262) in 2002, the European standard was renumbered
EN 62262. The IK code is from 00 to 10, and corresponding impact
energy is from 0.14J to 20J.
IK pendulum hammer is for IK07 to IK10 testing, the hammer is made
by steel, the working principle is : the sample is placed in
normal, then adjust the impact points, and position the impact
device, then release the hammer to freely impact the hammer. The
impact angle and impact height are adjustable.
The test rig is made of aluminum alloy, with four wheels at the
bottom, and the whole device can move freely.
2. Parameter
| Swing Pipe | Steel pipe (Length: 1000mm, outer diameter: 15.9mm, thickness:
1.5mm), equip with hammers to equivalent mass |
| Impact angle | 0~900 |
| Lifting stroke | 200-1200mm |
| Impact hammers | 0.5kg, 1.7kg, 5kg, 5kg steel hammers for IK08 to IK10 Pendulum
impact |
| Impact energy: | 2J, 5J, 10J, 20J |
4. Characteristics of Striking Elements
| Characteristics of Striking Elements |
| Energy/J | ≤1 ±10% | 2 ±5% | 5 ±5% | 10 ±5% | 20 ±5% | 50 ±5% |
| Equivalent mass±2%kg | 0.25(0.2) | 0.5 | 1.7 | 5 | 5 | 10 |
| Material | Nylon | steel |
| R/mm | 10 | 25 | 25 | 50 | 50 | 50 |
| D/mm | 18.5(20) | 35 | 60 | 80 | 100 | 125 |
| f/mm | 6.2(10) | 7 | 10 | 20 | 20 | 25 |
| r/mm | - | - | 6 | - | 10 | 17 |
| l/mm | Depends |
5. Fall Height
| Fall Height |
| Energy/J | 0.14 | 0.2 | (0.3) | 0.35 | (0.4) | 0.5 | 0.7 | 1 | 2 | 5 | 10 | 20 | 50 |
| Equivalent mass/kg | 0.25 | (0.2) | 0.25 | (0.2) | 0.25 | (0.2) | (0.2) | 0.25 | 0.25 | 0 .25 | 0.5 | 1.7 | 5 | 5 | 10 |
| Fall height±1%mm | 56 | (100) | 80 | (150) | 140 | (200) | (250) | 200 | 280 | 400 | 400 | 300 | 200 | 400 | 500 |
6. Degrees of protection against external mechanical impacts
| IK01 | IK02 | IK03 | IK04 | IK05 | IK06 | IK07 | IK08 | IK09 | IK10 |
| 0.14J | 0.2J | 0.35J | 0.5J | 0.7J | 1J | 2J | 5J | 10J | 20J |
7. Picture
