IEC616EMC Test Equipment Electrical Fast Transient Generator with
16A CDN
1. Standard of Electrical Fast Transient Generator:
IEC/EN61000-4-4, IEC/EN60601-1-2, IEC/EN61000-6-1, IEC/EN61850-3,
ANSI/EEE C62.41
2.Introduction:
EFT-5K series electrical fast transient generators is designed
according to IEC61000-4-4. They are widely applied to the fields of
industry control appliance, household appliance, medical
equipment,components, auto control equipment and etc.
The electrical fast transient/ burst generator is to simulate the
electrical fast transient or burst, the repetitive fast transient
test is a test with bursts consisting of a number of fast
transients, coupled into power supply, control, signal and earth
ports of electrical and electronic equipment.
The test voltage of burst generator is from 0.25KV to 5KV, which
can cover all the test levels, and user can define the test level.
The high amplitude, short rise time, high repetition rate are
completely meet the requirment of IEC61000-4-4.
The electrical fast transient/burst generator is built in a
380V/16A CDN.
EMC Test equipment includes: EMI receiver, ESD generator, surge
generator, electrical fast transient generator, voltage dips short
interruptions and voltage variatins generator, ring wave generator
and etc.
3. Features:
1). 7 inch LCD touch screen, easy to operation and update the
software
2). 1000-group memories
3). Built-in 3-phrase 5-wires coupling and decoupling network (20A)
4). Adopt imported high-power non-inductive resistor to make sure
the waveform stable and no deformation
5). The coupling network adpots the newest technology with low
attenuation and plentiful power
6). Built-in temperature-humidity sensor to monitor the environment
at real time
7). With self-diagnosis function to judge the abnormal of high
voltage and impulse output
4. Parameter:
| Model | EFT-5K16 | EFT-5K30 |
| open circuit output voltage | 0.25－5kV ±5％ |
| 50Ω load output voltage | 0.125－2.5kV ±5％ |
| Wave sharp of the pulse | 5/50ns,50Ω/1000Ωload |
| Rise time | 5ns ±30％,50Ω load |
| 5ns ±30％,1000Ωload |
| duration | 50ns ±30％,50Ωload |
| 50ns －15/+100sn, 1000Ωload |
| Impedance | 50Ω ±20％ |
| Output polarity | Negative/positive |
| Repetition frequency | 0.1－1200.0kHz ±10％ |
| burst duration | Standard | 15ms@2.5kHz/5kHz,750μs@100kHz,250μs@300kHz |
| Adjustable | Nos of pulse can adjust at 1-255
Burst duration=(pulse number-1)/repetition frequency |
| Burst period | 100－999ms |
| Burst mode | Synchronous or asynchronous |
| Synchronous phase | Free set at 0－3600 , resolution: 1° |
| Test function: | IEC standard or set test mode freely (1000 groups) |
Built-in coupling and decoupling network
(3-phrase and 5 wires) | AC | 3-phrase 380V,16A, 50/60Hz | 3 phrase 380V,30A,50/60Hz |
| DC | 380V,16A (Max) | 380V,30A (Max) |
| Coupling mode | L1,L2, L3, N,PE,freely setup |
| Coupling capacitors: | 33nF ±10％ |
| Environment requirements | Temperature:15°C－35°C; Humidity: 10%－75% |
| Power requirements | AC220±10％,50/60Hz, 300W |
| Dimension | 470mm(W)×215mm(H)×500mm(depth) |
| Weight | About 25kg |
About Pego:
Pego Tester (Jiangxi) is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in
developing, marketing and service for electronic test equipment. At
the moment, the company has seven groups main products: Go” and
“Not Go” gauges, UL and IEC test probes, electric safety test
equipment, environment test equipment, EMC and EMI test equipment,
LED test equipment and mechanical equipment, the business scope
includes E14, E27, E40 go and not go gauges, IP code probes, UL
probes, flame test chambers, glow-wire test apparatus, tracking
index apparatus, ground resistance tester, insulating resistance
tester, hipot tester, temperature chamber, waterproof test
equipment, dust chamber, spring hammer, pendulum hammer, ESD gun,
surge generator, goniophotometer, integrating sphere,
spectroradiometer, power supply and etc.
